HDPE Geomembrane with ASTM Standar (7.0m)

Product Name: HDPE Geomembrane with ASTM Standar (7.0m)
Model No.:
Place of Origin:Jiangsu
Application:

Landfill lining and capping

Reservoirs, lagoons, ponds and lakes

Gas membranes below building floor slabs

Storm water attenuation



HDPE liners exhibit very high tensile strength, tear & puncture resistance. Their resistance to chemicals is the highest among polyolefins and this is why it is the preferred choice for municipal landfills lining, for mining and chemical plants ground insulation. They are produced at a thickness of 0. 75-2. 5 mm and a width of 6 m and geomembranes are made of prime quality HDPE resin and contain 2. 5% fine carbon black for outmost UV-resistance. They comply with domestic and international standards (gri GM-13)



Specification: thickness: 0. 3mm-3. 0mm width: 4-10m



Characteristic:

- there are two types of the geomembrane's surface: smooth and textured. The textured surface has higher friction coefficient which can be used to avoid slide between the two covering layers.

- it has excellent erosion resistance, pitch, oil and tar resistance, bacteria resistance and no poison

- the product has high UV resistance, oven aging resistance and oxidant resistance, it can endure the direct sunlight lasting for decades.

- it has high tensile strength and tear resistance with excellent puncture resistance on the surface of rough and coarse basic ground. The puncture resistance by plant root accord with din4062.

- it can be easily welded by hot wedge and hot wind and is convenient for construction.